Hip Pocket Builders' Forum

Indoor Free Flight Forum => Peanut Scale => Topic started by: jose12 on October 29, 2018, 07:27:24 PM



Title: Culver Dart
Post by: jose12 on October 29, 2018, 07:27:24 PM
I tried to fly the Culvert Dart and, he did it but not very well, I have to improve his flight. And excited about the possibility that he would fly away from his twin brother. When I fly them - if they fly - I tell them


Title: Re: Culver Dart
Post by: flydean1 on October 29, 2018, 09:23:42 PM
If you haven't covered it yet, you should move the rear motor mount to the first set of uprights behind the wing.  It will allow you to run a very long motor without upsetting the balance and requiring a lot of weight on the nose.


Title: Re: Culver Dart
Post by: jose12 on October 30, 2018, 11:23:19 AM
This morning Flydean1 before drilling the rubber supports I thought it would be convenient to advance the support that marks the plane that is Mooney and his suggestion has decided me to thank you very much for your help. I will continue commenting on the results and I hope for more help.


Title: Re: Culver Dart
Post by: jose12 on October 30, 2018, 11:24:08 AM
This morning Flydean1 before drilling the rubber supports I thought it would be convenient to advance the support that marks the plane that is Mooney and his suggestion has decided me to thank you very much for your help. I will continue commenting on the results and I hope for more help.


Title: Re: Culver Dart
Post by: jose12 on November 02, 2018, 11:25:19 AM
I have already changed the support of the rubber skein we will see if it improves.

Thank you for reaffirming my idea


Title: Re: Culver Dart
Post by: flydean1 on November 02, 2018, 11:29:31 PM
I think you will be pleased with the results.


Title: Re: Culver Dart
Post by: jose12 on November 26, 2018, 10:15:36 AM
Friends here I show you the culver already understood, in some flight tests I did it seems that it can fly. When I continue with the painting and flight tests, I say hello Jose.