Hip Pocket Builders' Forum

Outdoor Free Flight Forum => Peanut Scale => Topic started by: Techdoggo on March 04, 2019, 08:33:20 PM



Title: peanut scale plan downloads
Post by: Techdoggo on March 04, 2019, 08:33:20 PM
Hi to get full size what is the standard enlargement ?


Title: Re: peanut scale plan downloads
Post by: lincoln on March 04, 2019, 08:58:41 PM
I don't think there IS a "standard enlargement" unless it's 100 percent. When printing, you should set the options to print at 100 percent rather than to fit, which may be the default setting. If 100 percent doesn't do it, you can at least measure the print out and figure out what percentage to use. Generally, unless you're exactly reproducing an old design that was meant for some smaller size like 12 inches, you'd want to be just under 13 inches span for peanut scale.