Logo
Builders' Plan Gallery  |  Hip Pocket Web Site  |  Contact Forum Admin  |  Contact Global Moderator
May 24, 2019, 07:13:36 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with email, password and session length
 
Home Help Search Login Register
Pages: 1 2 3 [4]   Go Down
Print
Author Topic: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit  (Read 3273 times)
0 Members and 1 Guest are viewing this topic.
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #75 on: March 01, 2019, 12:38:36 PM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

Pic #1     1521     The thick black outline is now inked on, and now for the fun part - trying to peel off that low tack green masking tape without ripping the tissue ...

Pic #2     1522     One guy has to hold the tape down close to where the other guy is carefully peeling it off -   blue paper and color is coming off of the tissue with the tape as it peels off -  got to watch that ...   Huh

Pic #3     1523     One wing finished.  A few mistakes   Tongue  , but not tooooo bad ...  Three more to go - only the fine outllines are done on these and no color ...   Undecided

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
Indoorflyer
Gold Member
*****

Kudos: 12
Offline Offline

United States United States

Posts: 473




Ignore
« Reply #76 on: March 01, 2019, 12:59:27 PM »

Can ya get it scanned to file?  That artwork is too nice to be a one shot deal. A saved digital version could enable reprints or scaling for a different sized model down the road, as they say...
Logged

Make the same mistake on both sides; nobody will notice...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #77 on: March 01, 2019, 01:16:33 PM »

Hi Indoorflyer.  I am sorry, but my printer is dead.   Undecided    I will have to do some thinking about how to see if I can get them scanned ...  How about a dead on pic?

LASTWOODSMAN
Richard
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
Indoorflyer
Gold Member
*****

Kudos: 12
Offline Offline

United States United States

Posts: 473




Ignore
« Reply #78 on: March 01, 2019, 01:22:55 PM »

That should work. Maybe lay a scale in the view for reference. Could also take the artwork on backing sheets to a copy shop and scan/save to a thumbdrive or have it emailed to you.
« Last Edit: March 01, 2019, 02:11:01 PM by Indoorflyer » Logged

Make the same mistake on both sides; nobody will notice...
lincoln
Platinum Member
******

Kudos: 30
Offline Offline

United States United States

Posts: 1,897



Ignore
« Reply #79 on: March 01, 2019, 03:04:14 PM »

Some similar artwork, though obviously it wouldn't fit on an Osprey:
https://www.facflyer.com/BogusBird.htm
Logged
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #80 on: March 01, 2019, 03:57:29 PM »

Hi Lincoln.  Thanks for the link -  that scary eagle head is pretty scary, what with the teeth inside the beak.   Shocked   Those are pretty good color templates.

Hi Indoorflyer.   Here is three pics of these 20" Osprey glider feathered templates.   Let me know if they are OK to use.   I always drew the left half first, folded it over in the middle centerline, and then traced it on the window, to get the exact same shape of the feathers for the opposite right side.  The rib locations are all marked.  Any questions, please ask away ...

Pic #1     1525     The three different stab outlines
Pic #2     1528     Stabilizer is colored
Pic #3     1530     Two thin ink Wing templates

LASTWOODSMAN
Richard

Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #81 on: March 01, 2019, 11:39:33 PM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

Pic #1     1531     "The backing blotter sheet" is taped flat.  The tissue with inked the on pattern is taped flat on top of this.   First of three wings to do.

Pic #2     1532     Mandrake finishes inking on the thick black outline.

Pic #3     1533     M and B color in the pattern -  it looks OK.

Pic #4     1534     More Picasso abstract art.

Pic #5     1537     Now one more wing to go - but I do have two more wing outlines -  one is for a spare if the ink lasts.     Almost DONE .    Roll Eyes Roll Eyes

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #82 on: March 03, 2019, 02:38:18 PM »

OSPREY  20"  SPORTS GLIDER   Vintage Model Company laser cut kit

TISSUE SHRINK AND SEAL BENCH TEST

Pic #1     1539     Test tissue is cut and lined and colored up.

Pic #2     1540     Test piece is now white glued to the little balsa frame.

Pic #3     1541     Spray misted and shrunk with  70%  Rubbing Alcohol.

Pic #4     1545     Dried from the alcohol mist spray.

Pic #5     1547     Sprayed with Krylon Clear Gloss rattle can -  two light coats -  to seal the tissue.

Pic #6     1549     All dry.

     There does not appear to be any running  of the paint colors or the black line inking.   Maybe that "ink blotter" backing sheet, really sponged up, and soaked up, all of the excess marker paint color.   Maybe I should have tried a much larger test piece of tissue ?   Huh

Onwards ...

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #83 on: March 04, 2019, 09:33:54 AM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

    Well, we are in a deep freeze here again, so time for more research into gliders and canopies and pilots and control panels.
     It is interesting how the pilots'  legs are crammed into the nose of the cockpits of modern gliders.
     I also found some really good Glider Pilots (although too large for a  1:20  scale glider), but these pilots -  "Roger's Pilots"  -  have great color schemes, and great realism.   Here at  http://rogers-pilots.co.uk/pilots.html

Pic #1     Cold Jet Stream (Polar Vortex) March 2 2019
Pic #2     Cold Jet Stream - temps are in Celsius --  Looks like some one is nefariously bouncing microwaves off of the Ionosphere and forcing the jetstream southwards ...
Pic #3     Glider Cockpit
Pic #4     Glider Cockpit even more crowded
Pic #5     Glider Controls 2
Pic #6     6639     6" tall,  1:12 scale, Williams Bros Pilot bust head and shoulders  - a previous attempt ...

Watch how far this little glider flies https://www.bing.com/videos/search?q=Glider+Flying&&view=detail&mid=044197C2A6AA5BD9C79F044197C2A6AA5BD9C79F&&FORM=VRDGAR

I am considering the possibilities  ...

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #84 on: March 05, 2019, 09:07:00 PM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

     More bitter cold, so more playing around.  I ran out of blue and orange marker, so I dug out my old smaller markers looking for a match.

     Here is four pilot views - very precise and sharp features and soooo light.  We traced out 3 sketches of a pilot, from over the computer screen, to start finalizing a color scheme on.   

Pic #1     1554
Pic #2     1555
Pic #3     1556
Pic #4     1564
Pic #5     1571

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #85 on: March 05, 2019, 09:11:22 PM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

     I scribbled some sketches, to see if they could fit on an instrument panel,  of four primitive instruments  -  Airspeed Indicator, Altimeter, Mechanical Variometer (Rate of Climb and Descent), and a Magnetic Compass.

Pic #1     Airspeed Indicator
Pic #2     Altimeter
Pic #3     Mechanical Variometer (Rate of Climb and Descent)
Pic #4     Magnetic Compass 2
Pic #5     Glider Instrument panel 2
pic #6     1572     Closeup of poor instrument sketches with the fine black marker.

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
dputt7
Platinum Member
******

Kudos: 90
Offline Offline

Australia Australia

Posts: 1,940




Ignore
« Reply #86 on: March 06, 2019, 02:06:40 AM »

   Hi Richard
                  Great work you're doing here, You probably have it sorted by now but I have posted a photo of an Instrument Panel from a  Grunau Baby IIb, while the instruments are German I'm sure it would suit your model. While the panel is a reproduction the instruments are original. Hope it is of some use. 

                                                                                             Dave
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #87 on: March 06, 2019, 04:40:24 PM »

     Hi Dave.  Thanks for the encouragement and that good pic.   Smiley   I think I will try drawing the instruments (now that I sort of have the hang of it ),  on that pic you posted of the early instrument panel of a Granau glider.   Would there also be a Magnetic Compass somewhere else in the cockpit of the Granau?
     Here is a two page (two pics),  complete (?),   list of sailplanes/gliders by country from 1920 to 1945.   This list is really handy for a guy like me, just learning about Vintage gliders and sailplanes.

Pic #1     Sailplane List  Page one
Pic #2     Sailplane List  Page two
Pic #3     Minimoa Instrument Panel - but I cannot make out the instruments ...
Pic #4     DISCUS 2 Instrument Panel
Pic #5     Glider Pilot Edward
Pic #6     Glider Pilot Howard 2

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #88 on: March 07, 2019, 04:57:23 PM »

OSPREY 20"   SPORTS GLIDER   Vintage Model Company laser cut kit

     Well, the hardest, and most time consuming part, is finally done.   Tongue    I found some old orange and blue markers and finally finished up the fifth wing, cleared the building board, and laid out the tissue to see what it looks like.

Pic #1     1573     On this last wing, the orange is too bright.   Undecided

Pic #2     1574     Pic of all of the wrinkled up,  finished tissue.

Pic #3      1575     Framework is laid over the tissue.

Pic #4     1579     A bit of orange tissue is added to the fuse front, and the nose block.   Pilot for comparison also.

Pic #5     1581     Framework is removed, and now it is starting to look like a color scheme coming together ...  looks more like a Flying Fish than a Sea Gull ...   Cheesy

Pic #6      Flying Fish
    
Now to the pilot painting and Instrument Panel and gages.

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #89 on: March 12, 2019, 12:41:49 AM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

GLIDER PILOT PAINTING  1/20  scale

     Today was a nice liesurely day spent trying to get the pilot color scheme just right,  and painted  out ahead of time, before even starting on that nicely detailed, little Dave Banks Pilot bust/figure.   Figuring out the color scheme is the hard part -  the painting is then the easy part.  I must get this done before I glue the fuselage together, so I can figure out the pilot seat.

Pic #1     1616     Started to figure out the Pilot colors, so that he matches the glider color scheme.

Pic #2     1617     Close up of the list of colors to choose from, and labelling of the diagram first.

pic #3     1619     Full bench view,   and what a glider pilot looks like on the screen monitor.

Pic #4     1620    The middle pilot has the latest color scheme.

Pic #5     1621     Closeup of the middle Pilot color.  I still have to get the right amount of blue color into the seat belt harness buckle, to make it look more metallic,  or just leave it light gray.  Also the bronze of the shoulder patches is the wrong color ...

Pic #6     GLIDER  1908  TO  1945   I would like to model this one some day.  I don't know enough about the gliders yet, to properly ID this one.   Anyone ?

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
vtdiy
Gold Member
*****

Kudos: 12
Offline Offline

United States United States

Posts: 303




Ignore
« Reply #90 on: March 12, 2019, 10:45:36 PM »

Richard nice work. Still following. Your mystery glider:

https://en.wikipedia.org/wiki/Rotter_Nemere

https://www.youtube.com/watch?v=fVbbGu-XzIo

3-View:

https://www.rcgroups.com/forums/showthread.php?1992887-Rotter-Nemere#post26047119

Build log:

http://www.retroplane.net/forum/viewtopic.php?t=4645
« Last Edit: March 12, 2019, 11:00:24 PM by vtdiy » Logged
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #91 on: March 13, 2019, 12:31:43 AM »

     Helloooo ... vtdiy !   Thanks so much for those great handy links - they are perfect   Cheesy  - really saves a lot of time browsing, and thanks for the nice comment.   Are you getting any flying time indoors?   Flying any new models?
      Great to hear from you, and I hope you post in some more interesting topics.
PS  - you really know your planes!    The Hungarian "NEMERE" Glider.

LASTWOODSMAN
Richard
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
LASTWOODSMAN
Gold Member
*****

Kudos: 25
Offline Offline

Canada Canada

Posts: 864


Topic starter
REAL PLANES HAD ROUND ENGINES AND TWO WINGS



Ignore
« Reply #92 on: March 13, 2019, 12:39:17 AM »

OSPREY  20"   SPORTS GLIDER   Vintage Model Company laser cut kit

GLIDER PILOT PAINTING  1/20  scale

    The Pilot is all painted up.   I do need to get some fine brushes.  There is such fine detail - realistic creases and folds in the clothing -  in this foam Pilot, you can really see it coming to life as soon as you start painting it.   And a good old fashioned wave of the hair parted on the side of that youth pilot.   Wait a minute -  that is how all the kids do it now - clean cut, tapered cuts,  etc ...

Pic #1     1630     He looks like the guy in the middle.
Pic #2     1623     Closeup.
Pic #3     1626     Outside front.
Pic #4     1628     Outside rear.
Pic #5     1633     The weight of the painted pilot is  0.70   grams.   The latest mock up gages are in blue.
Pic #6     CONDOR

     It is now time to work on the mag compass mock up and finish off the other gages and the instrument panel.    These are tough to detail by hand when the gages are that small.   An 'out of focus',  little smudge of pencil lead, will have to do for a small number.

LASTWOODSMAN
Richard
Attached files Thumbnail(s):
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Re: OSPREY 20" SPORTS GLIDER Vintage Model Company laser cut kit
Logged

OH, I HAVE SLIPPED THE SURLY BONDS OF EARTH ... UP, UP THE LONG DELIRIOUS BURNING BLUE ... SUNWARD I'VE CLIMBED AND JOINED THE TUMBLING MIRTH OF SUN-SPLIT CLOUDS ...
Crabby
Titanium Member
*******

Kudos: 132
Offline Offline

United States United States

Posts: 2,036


I never met a modeler I didn't like



Ignore
« Reply #93 on: March 13, 2019, 12:51:09 AM »

[Wait a minute -  that is how all the kids do it now - clean cut, tapered cuts,  etc ...


Crazy kids! what's this world coming to?
Logged

The Threadkiller!
OZPAF
Palladium Member
********

Kudos: 175
Offline Offline

Australia Australia

Posts: 4,832



Ignore
« Reply #94 on: March 13, 2019, 08:11:29 PM »

Great info vt. Richard your pilot is getting a bit heavy at 0.7g Smiley You may have to shave off his hair - make him a skin head Cheesy

Impressive detail.

John
Logged
vtdiy
Gold Member
*****

Kudos: 12
Offline Offline

United States United States

Posts: 303




Ignore
« Reply #95 on: March 14, 2019, 11:05:23 PM »

Richard, I'm embarrassed to say what I've been flying indoors -- basically a $25 Ebay RTF. Well also, a more interesting balsa and (mylar?) R/C double size version of a Delta Dart built by a friend. He calls it the "Servonaught" because it uses old Airhogs 27Mhz guts and motors to steer with. Not just the usual differential twin thrust, but also the motors are mounted on a pivoting flybar, and that has tiny lines going back to the rudder. So you get both differential thrust AND rudder. I think the whole thing weighs about 20 grams, not sure. He's a dyed in the wool FF rubber guy, so I'm his ghost pilot for very occasional R/C excursions.

I've been flying more outdoors -- built a Horten-ish flat prop in slot flying wing, designed by GPW. It originally had fins, but I flew it that way for awhile, and then tried what I call a "stepped elevon" and snipped off the fins. It still flies fine without them, and no actual washout.

I also built a slightly enlarged R/C version of a Scientific C/L Thunderbird. That's been maidened, but is not in good trim yet.

Anyway, back to your Osprey! Pilot looks very blonde. Well, more power to him, he'll be gray some day like the rest of us!
Logged
Pages: 1 2 3 [4]   Go Up
Print
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!