Logo
Builders' Plan Gallery  |  Hip Pocket Web Site  |  Contact Forum Admin  |  Contact Global Moderator
February 25, 2020, 01:38:32 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with email, password and session length
 
Home Help Search Login Register
Pages: 1 ... 30 31 32 33 34 35 36 [37]   Go Down
Print
Author Topic: Show us your P-30's  (Read 63333 times)
0 Members and 1 Guest are viewing this topic.
Oldtime Flyer
Gold Member
*****

Kudos: 10
Offline Offline

United States United States

Posts: 335


"Keep it Simple"



Ignore
« Reply #900 on: December 04, 2016, 01:31:39 AM »

I built the short kit. I didn't know how to add weight and balance at cg.  Adding weight to the fuse under and the wing makes sense thanks for the help. I had planned on flying it underweight. 

Add weight to the nose first with the 10 gram motor installed. It will take at least some of the 10 grams you're under weight to balance at the C/G. (As noted on the plans) Then add the remaining left over under the wing at the C/G.
Thank you for building the"Majestyk."

Otf'er.......

Logged
FLYACE1946
Platinum Member
******

Kudos: 26
Offline Offline

United States United States

Posts: 1,557




Ignore
« Reply #901 on: December 06, 2016, 06:42:33 PM »

After final assembly is accomplished and the model still comes out too lite then I suggest you add rubber bands to get the weight total you need. I had to do that on a Majestyk several years ago. It still flew OOS.
Logged
Oldtime Flyer
Gold Member
*****

Kudos: 10
Offline Offline

United States United States

Posts: 335


"Keep it Simple"



Ignore
« Reply #902 on: December 08, 2016, 12:39:30 AM »

After final assembly is accomplished and the model still comes out too lite then I suggest you add rubber bands to get the weight total you need. I had to do that on a Majestyk several years ago. It still flew OOS.

After you have the model balanced at the correct C/G which is more important than any other issue.

Otf'er......
Logged
Bargle
Gold Member
*****

Kudos: 22
Offline Offline

United States United States

Posts: 699




Ignore
« Reply #903 on: April 22, 2018, 09:45:42 AM »

Here we go. Banana Fritter #3. Weight without rubber is 46 grams, my heaviest BF so far. Still expect it will fly well enough for my small field.
Attached files Thumbnail(s):
Re: Show us your P-30's
Re: Show us your P-30's
Logged
dohrmc
Gold Member
*****

Kudos: 24
Offline Offline

United States United States

Posts: 550




Ignore
« Reply #904 on: August 30, 2018, 03:10:26 PM »

Lost my modified Pirate at the last contest. She sleeps with the fishes in the Chattahoochee now. So I got out my old Square Eagle Kit and built it. Always wanted to build it, and so I did.
Test flew it yesterday at the sod farm, and it flew right off the board, no clay needed. It’s a little under 44 grams, which is not bad for a stock kit, and a Gizmo Geezer on the pointy end.
6 strands of 1/8” will be its steady diet.
A big rain shower forced me to cut short my trim session, but I’ll finish it next week, and should have a fine P30 to fill out the next contest roster.

I’ve never seen a Square Eagle that did not fly well.
Attached files Thumbnail(s):
Re: Show us your P-30's
Logged
dohrmc
Gold Member
*****

Kudos: 24
Offline Offline

United States United States

Posts: 550




Ignore
« Reply #905 on: August 30, 2018, 03:23:16 PM »

While I’m posting pictures, I found this photo of my Tail Firster. A good flying plane! 
Attached files Thumbnail(s):
Re: Show us your P-30's
Logged
Scottl0413
Gold Member
*****

Kudos: 10
Offline Offline

United States United States

Posts: 313



Ignore
« Reply #906 on: September 01, 2018, 07:57:58 PM »

Dorhm, looks great!! There just something about those old models that just fly right off of the Bd. I.e. Super 30 and Majestics!

Scott
Logged
dohrmc
Gold Member
*****

Kudos: 24
Offline Offline

United States United States

Posts: 550




Ignore
« Reply #907 on: September 01, 2018, 10:00:36 PM »

Thanks!
I have a Really nice Majestic I finished also. Initial tests are great. Need to get a picture posted. 40.2 grams, so I imagine it will be the 3/32” one.
Logged
OZPAF
Palladium Member
********

Kudos: 183
Offline Offline

Australia Australia

Posts: 5,355



Ignore
« Reply #908 on: September 02, 2018, 01:59:21 AM »

Nice models DO. 44 gms sounds pretty good to me for your Square Eagle. how well di the Tail Firster fly?

John
Logged
dohrmc
Gold Member
*****

Kudos: 24
Offline Offline

United States United States

Posts: 550




Ignore
« Reply #909 on: September 02, 2018, 06:46:30 PM »

The Tail Firster flies very well under power and glides well. It has done quite a few maxes, but I wasn’t very focused on learning how to fly it well.
I am going to fly a lot more in P30, so I intend to get more squared away. Maybe I can get it going better.
Logged
danberry
Gold Member
*****

Kudos: 17
Offline Offline

United States United States

Posts: 952



Ignore
« Reply #910 on: September 02, 2018, 07:31:19 PM »

They fly just fine.
Logged
duration
Gold Member
*****

Kudos: 8
Offline Offline

United States United States

Posts: 474



Ignore
« Reply #911 on: September 03, 2018, 06:48:17 AM »

The canard layout might have an advantage in rubber-powered events such as P-30 that do not allow folding props. A freewheeling prop at the rear would seem to have less drag than one in front, since the rear-mounted prop would be working in the "dirty" air behind the wing. A horizontally-stopped aft prop might be even better. (The rules only bans folding or feathered props.)

A conventional layout with the stab mounted on two booms and a pusher prop just behind the wing would work, but only if a short motor and gears were used to get the CG in the right spot.

Louis
Logged
Lee from Chitown
Copper Member
**

Kudos: 0
Offline Offline

United States United States

Posts: 7



Ignore
« Reply #912 on: December 30, 2019, 12:17:23 PM »

Burner DT Timer
Bernard at Hummingbird Model Supply has a limited run of burner DTs and RDTs available as of 12/30/19.
Nice to see they are available again.
See his site hummingbirdmodelsupply.com.
Logged
lincoln
Titanium Member
*******

Kudos: 33
Online Online

United States United States

Posts: 2,138



Ignore
« Reply #913 on: December 31, 2019, 10:56:11 AM »

The canard layout might have an advantage in rubber-powered events such as P-30 that do not allow folding props. A freewheeling prop at the rear would seem to have less drag than one in front, since the rear-mounted prop would be working in the "dirty" air behind the wing. A horizontally-stopped aft prop might be even better. (The rules only bans folding or feathered props.)

A conventional layout with the stab mounted on two booms and a pusher prop just behind the wing would work, but only if a short motor and gears were used to get the CG in the right spot.

Louis

I wonder if the decreased drag of a pusher hiding behind a wing would be more important, or the decreased efficiency of having it behind the wing? Maybe if you could get the model to fly prop forward on the way up and prop in the back in the glide? I know that sounds ridiculous, but maybe there's a way to do it.
Logged
applehoney
Titanium Member
*******

Kudos: 279
Offline Offline

Canada Canada

Posts: 3,176




Ignore
« Reply #914 on: December 31, 2019, 03:47:10 PM »

Years ago I became  involved with an extended run of P30 flyoff flights against a Tailfirster, matching maximums until I finally found a tad more lift than the other flyer did.   Gave me great respect for that design.
Logged
or_sh
Bronze Member
***

Kudos: 0
Offline Offline

Israel Israel

Posts: 10



Ignore
« Reply #915 on: February 11, 2020, 09:09:02 AM »

Hello guys,
Finely i finish my project of building my P-30 models.
I didn't fly them yet because the weather, so i can't tell you how the fly.
There is 3 models.
first model it call "pirate" (i think so) is Andrey Bordouv kit with my changes , i take from the kit only the wing and stab
second model is from Tony Mathews plan , i take from there the wing and the profile all the rest is my plan.
Third model to be honest i don't sure what profile i use there , it was the first model that i build , like you can see it's little bit different, i use there 4 panel wings like coupe or F1B models.

First model without beacon wight 43 grams   
Second model without beacon wight 41 grams
Third model without beacon wight 45

On the two first models the "pylon" not glue so i can change the C.G , now i start with 60% C.G .
Attached files Thumbnail(s):
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Logged
or_sh
Bronze Member
***

Kudos: 0
Offline Offline

Israel Israel

Posts: 10



Ignore
« Reply #916 on: February 11, 2020, 09:11:57 AM »

More photos.
Attached files Thumbnail(s):
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Re: Show us your P-30's
Logged
PeeTee
Titanium Member
*******

Kudos: 49
Online Online

United Kingdom United Kingdom

Posts: 2,258



Ignore
« Reply #917 on: February 11, 2020, 09:42:24 AM »

Very nice, I hope they fly as well as they look!
Logged
or_sh
Bronze Member
***

Kudos: 0
Offline Offline

Israel Israel

Posts: 10



Ignore
« Reply #918 on: February 11, 2020, 09:56:27 AM »

Very nice, I hope they fly as well as they look!

Thank you, i hope also , i will post here how the fly.
Logged
OZPAF
Palladium Member
********

Kudos: 183
Offline Offline

Australia Australia

Posts: 5,355



Ignore
« Reply #919 on: February 11, 2020, 06:47:47 PM »

Beautiful models. I'm sure they will do well.

John
Logged
Mike Thomas
Bronze Member
***

Kudos: 2
Offline Offline

Australia Australia

Posts: 87



Ignore
« Reply #920 on: February 12, 2020, 02:18:57 AM »

Yes, very impressive models. Did you make your own motor tubes? And what is the motor configuration - strands, length?
Logged
Pat D
Silver Member
****

Kudos: 5
Offline Offline

Ireland, Republic of Ireland, Republic of

Posts: 195




Ignore
« Reply #921 on: February 14, 2020, 09:26:46 AM »

great to see such nice P30's being built !

Great work

Pat

Logged
or_sh
Bronze Member
***

Kudos: 0
Offline Offline

Israel Israel

Posts: 10



Ignore
« Reply #922 on: February 16, 2020, 10:30:55 AM »

Yes, very impressive models. Did you make your own motor tubes? And what is the motor configuration - strands, length?

Yes i did it buy myself , i also make the same tubes for F1G coupe models just shorter.
I make it on rod .
this 500 mm length , i don't remember what is the diameter in the front , i just know that i fit it to Stepan F1G front end , and the rear side of the fuselage is 16 mm
I put inside one more layer of fiberglass only for the hole for the rear peg.

Logged
Pages: 1 ... 30 31 32 33 34 35 36 [37]   Go Up
Print
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!