You MUST be a MEMBER in Hip Pocket Aeronautics "Builders' Forum" to REGISTER for access to the Plan Gallery.
Forum Members can visit This Topic in the Forum to Register. Logging In to the Forum is required.
Home / Free Flight / Indoor Scale / Hurricane Prototype K5083 from VMC Hurricane Kit (Revised 01-01-18) Top Plans  New Items (Last 10 days)  Search  

Registered users

Username:

Password:

Log me on automatically next visit?

» Forgot password

 
Random Plan

Booth Pusher
Booth Pusher (Ratz)
Lloyd S. Jones - 3 Views
Comments: 0
Downloads: 191

 

Hurricane Prototype K5083 from VMC Hurricane Kit (Revised 01-01-18)
Hurricane Prototype K5083 from VMC Hurricane Kit (Revised 01-01-18)

             << ZIP may not work for everyone

Hurricane Prototype K5083 from VMC Hurricane Kit (Revised 01-01-18)
Description: Part profiles and build notes for making a version of the Hawker Monoplane Interceptor prototype K5083 from the VMC Hurricane Kit.

Contents .

- Build notes as PDF.
- A4 Sheet of acetate profiles. (SVG - Inkscape 0.48, PNG & PDF)
- A4 Sheet of scheme markings. (SVG, PNG & PDF)
- A4 Sheet of part profiles. (PNG and PDF only)

Note well.
The modified plans are *for individual use only* and original part profiles are replicated with the kind permission of A. J. Darby. If you would like working drawings of the new part profiles that I worked up please contact me.

Images for a passable cockpit tub and MK I instrument panel are also available in the Indoor Scale section of the plan gallery. It is suggested that the MK I instrument panel is reserved for an electric or CO2 build because of the motor line in a rubber powered build.

PDF updated to remove incorrectly rendered guide / construction lines.
Keywords: VMC, HAWKER, HURRICANE, K5083, PROTOTYPE, INTERCEPTOR, MONOPLANE
Date: 01.01.2018 11:31
Hits: 1302
Downloads: 430
Rating: 0.00 (0 Vote(s))
File size: 3.1 MB
Added by: TheLurker

Comment:
TheLurker
Member

Join Date: 09.25.2017
Comments: 11
Spinner. Additional note.
If you have a go at a "conical" spinner using the plastic disc approach that I used there's a good chance it will work OK if you can get it more symmetrical than I did. It was about 0.5mm out on the inside giving a "catch" that mucked up the freewheel and which didn't show up until the flight trials at relatively high turn counts.

Using a thinner grade of plastic card would help as would more aggressive filing down of the inside of the cone along the line of the seam.
05.13.2018 15:27 Offline TheLurker



Previous Plan:
Hillson F.H. 40 from VMC MK I Hawker Hurricane  		  Next Plan:
Hyperwind 17in. (Plan and Article)

 

 

RSS Feed: Hurricane Prototype K5083 from VMC Hurricane Kit (Revised 01-01-18) (Comments)