You MUST be a MEMBER in Hip Pocket Aeronautics "Builders' Forum" to REGISTER for access to the Plan Gallery.
Forum Members can visit This Topic in the Forum to Register. Logging In to the Forum is required.
Home / Designers and Collectors / Bill Brown / Rutango Top Plans  New Items (Last 10 days)  Search  

Registered users

Username:

Password:

Log me on automatically next visit?

Forgot password

 

Random Plan

Aeroflyte Brolga (Plan and Instructions)
Aeroflyte Brolga (Plan and Instructions) (glockie)
Aeroflyte
Comments: 0
Downloads: 429

 


Rutango
Rutango

            

Rutango
Description: 22 inch span twin-motor Canard. Very futuristic design sport flyer.
Keywords: Bill Brown, sport, canard, twin, rubber
Date: 10.15.2013 16:22
Hits: 1124
Downloads: 485
Rating: 5.00 (1 Vote(s))
File size: 19.2 KB
Added by: Pit

Comment:
Pit
Member

Join Date: 08.10.2008
Comments: 10
Necessary Modifications

Raise the main wing trailing edge 0.25 inch (6.3mm) when building at full size.

Use flat-bottomed, cambered airfoil on fore plane with a thickness of 0.187 inch (3mm) and add gussets where needed - especially in the wing and main fuselage.

Nacelles are weak as designed - add top and bottom formers/stringers or diagonals.

Make the wing without the "fork", using the point as the mating location. Add the portion of the turtle deck with a bit of a slant on the "front former to allow room for incidence adjustment.

Use the main wing for incidence adjustments
10.28.2014 11:46 Offline Pit



Previous Plan:
Polly 7 by Bill Brown  
 Next Plan:
Snout

 

 

RSS Feed: Rutango (Comments)