You MUST be a MEMBER in Hip Pocket Aeronautics "Builders' Forum" to REGISTER for access to the Plan Gallery.
Forum Members can visit This Topic in the Forum to Register. Logging In to the Forum is required.
Home / Radio Control / Aerobatic, Pattern, Sport / Simple T-6 Texan (2 of 3) Printwood Top Plans  New Items (Last 10 days)  Search  

Registered users

Username:

Password:

Log me on automatically next visit?

Forgot password

 
Random Plan

Aeromodeller 1969-01
Aeromodeller 1969-01 (old4570)
Aeromodeller Magazine
Comments: 0
Downloads: 697

 

Simple T-6 Texan (2 of 3) Printwood
Simple T-6 Texan (2 of 3) Printwood

             << ZIP may not work for everyone

Simple T-6 Texan (2 of 3) Printwood
Description: printwood of balsa and plywood for the kit. Sorry I missed a corner or two, but I don't think anyting critical is missing
Keywords: ACE, Simple, T6
Date: 03.02.2015 20:02
Hits: 943
Downloads: 395
Rating: 0.00 (0 Vote(s))
File size: 1.9 MB
Added by: robbe_wan

Comment:
ponappa
Member

Join Date: 12.10.2012
Comments: 18
Thanks
Cheers
03.03.2015 00:23 Offline ponappa
ponappa
Member

Join Date: 12.10.2012
Comments: 18
Oh Ho
Hey the wing plan or dimensions are not there in either of the plans...
This is plan one on balsa [fuse and tail ].
Would appreciate the wing which is missing...
Thanks
Cheers
03.03.2015 00:31 Offline ponappa
robbe_wan
Member

Join Date: 02.27.2015
Comments: 12
@ponappa
Cut a foam block 17 inches long. Place the root and tip templates on the block with the trailing edge of both templates flush with the back edge. Make both chord lines parallel (horizontal) with each other unless you wish to use the thinner tip template and include washout. In this case drop the leading edge of the tip .1 to .2 inches below the flat plane that would cut the chord line of both templates otherwise. Let me know if you need more than this. But if you know the length of the wing all you need is the tip templates to make the wing. You can even build a clipped wing version if you wish.
03.03.2015 21:01 Offline robbe_wan
robbe_wan
Member

Join Date: 02.27.2015
Comments: 12
Additional thoughts on foam wings
BTW I have posted Ace r/c's instruction sheets and they will be showing up in the near future. I thought I would mention, that although I did not do it on this model, on models of this size I have applied 1/32 sheet balsa to the foam wing cores and skipped the other reinforcements Ace shows (fiber strapping tape for instance) I would only epoxy 1” glass tape at the center joint, and then apply monocote to the wing. This wing was very strong, and I don’t think it is significantly heavier, although I did not weigh the wings to compare.
03.03.2015 21:53 Offline robbe_wan
ponappa
Member

Join Date: 12.10.2012
Comments: 18
Ok Thanks
Was planning to build on a 6mm Depron...
Didnt read through the details.
THANKS
Cheers
03.04.2015 01:01 Offline ponappa



Previous Plan:
Simple T-6 Texan (1 of 3) Plan  		  Next Plan:
Simple T-6 Texan (3 of 3) Foam Wing Construction

 

 

RSS Feed: Simple T-6 Texan (2 of 3) Printwood (Comments)