You MUST be a MEMBER in Hip Pocket Aeronautics "Builders' Forum" to REGISTER for access to the Plan Gallery.
Forum Members can visit This Topic in the Forum to Register. Logging In to the Forum is required.
Home / Model Companies / Pilot (OK Model Co) / Pilot Aeronca Champion 20 Top Plans  New Items (Last 10 days)  Search  

Registered users

Username:

Password:

Log me on automatically next visit?

Forgot password

 

Random Plan

Sterling - Kit A15, Zero (1 of 2)
Sterling - Kit A15, Zero (1 of 2) (skyraider)
Sterling Models
Comments: 1
Downloads: 1584

 


Pilot Aeronca Champion 20
Pilot Aeronca Champion 20

            

Pilot Aeronca Champion 20
Description: Pilot 20 size champ with instruction sheet
Keywords: Pilot, OK Models, Champion, Champ, 20 size
Date: 03.08.2015 23:43
Hits: 2469
Downloads: 755
Rating: 5.00 (1 Vote(s))
File size: 4.1 MB
Added by: littlera

Comment:
littlera
Member

Join Date: 02.24.2015
Comments: 5
scale added to drawing

Please note that I added a 6.00 inch scale in the lower right of the plan to assist in exactly scaling drawing when duplicated.

The instruction / template sheet is also included.

Enjoy!
03.12.2015 20:34 Offline littlera
littlera
Member

Join Date: 02.24.2015
Comments: 5
Ailerons

I am building this plane from original kit. I am modifying wing to accept strip ailerons. Each aileron is 21" long, 1 1/16" chord. I did not want to build as 3 channel and struggle with plane wallowing all over the sky. Aileron starts at rib W-2, ends about 1" from fuse.
03.13.2015 15:15 Offline littlera
littlera
Member

Join Date: 02.24.2015
Comments: 5
Building and Flying notes:

I have completed the kit build, adding ailerons, and the plane has flown successfully. It is a nice performer with aileron control!

Build:

Note that while the plan indicates a scale 1.5 deg. dihedral for each wing panel, the drawing itself and the machined dihedral braces are at 3 degrees per panel. This was probably found to be best without ailerons. For ailerons, I cut the dihedral back down to (true scale) 1.5 degrees per panel.

With ailerons, I did not build in the down and side thrust shown on the plan (or just a tiny bit.)

I installed a slightly used OS fs26 four stroke engine with a 10-6 prop. 8000 rpm. Adequate but certainly not over powered. Short grass or pavement needed for take off. Nice combo all in all.

I used modern digital micro servos (4), mini receiver, and telemetry module. JR radio and HiTec servos. This helped weight come in at minimum shown on plan of 3.5 lbs, even with the ailerons and extra servo added. Equipment has come a long way since this plane was designed in the early 80's. Covered with Ultracote. Small 750 mah pack to save weight. Wing loading only 20 oz./sq. ft. CG correct with battery under fuel tank.

Flying:

Had to reduce throws from that shown on plans. Even on low rates at 70% it was too much.

Plane handles nicely. Ailerons very effective. The Champ is a short coupled airplane, and most model Champs of any scale benefit from mixing rudder with aileron. This one is no different.

With no side thrust, the plane needed a couple of clicks of right rudder.
06.11.2016 10:34 Offline littlera



Previous Plan:
Pilot Ace 40S  
 Next Plan:
Pilot AKRO 1204M (Plans and Parts)

 

 

RSS Feed: Pilot Aeronca Champion 20 (Comments)